Product Comparison

Sigenergy EV Charger: AC vs DC Compared (2026 Prices, Pros & Cons)

Sigenergy AC vs DC EV charger compared: charging speeds, indicative pricing, pros and cons, vehicle-to-home, and which one suits your Brisbane home.

Brett FisherUpdated 17 November 20268 min read
The short version: Sigenergy makes two home EV chargers. The Sigen EV AC Charger is a standard wall charger, typically $1,980–$3,500 installed. The SigenStor EV DC Charging Module is a 12.5 or 25 kW DC fast charger that plugs into a SigenStor battery system, costs two to three times as much in hardware, and is bidirectional-ready. For overnight charging, AC does the job for far less. DC makes sense for fast daytime top-ups, a three-phase SigenStor, or vehicle-to-home.

Sigenergy EV Chargers at a Glance

Sigen EV AC ChargerSigenStor EV DC Module
Charger typeAC wall charger (Type 2)DC fast charger (CCS2)
Output7 kW single-phase; 11 or 22 kW three-phase12.5 kW (upgradable to 25 kW) or 25 kW
AC-to-DC conversionInside your carInside the charger
Needs a SigenStor?No, though some features work best with oneYes, it is part of the stack
Vehicle-to-homeNoBidirectional-ready (car must support it)
Hardware priceAbout $1,200–$1,500About $3,600–$4,700
Typical installed price$1,980–$3,500Quoted with the SigenStor system
Best forOvernight and solar-surplus chargingFast charging and vehicle-to-home

AC vs DC: What Is the Difference?

Your home supplies AC power, but an EV battery stores DC. Something has to convert one to the other, and the real difference between these two chargers is where that happens.

Sigen EV AC Charger

A smart, safe switch on the wall. It passes AC power to the car, and the car’s built-in converter turns it into DC. That converter has a fixed rating, commonly 7 or 11 kW, so even a 22 kW charger usually delivers 11 kW or less. Available as 7 kW single-phase, or 11 and 22 kW three-phase, with OCPP support and solar diversion through the mySigen app.

SigenStor EV DC Module

Converts power inside the module and feeds DC straight into the car’s battery, bypassing the onboard converter, so the car is no longer the speed limit. It clips into the SigenStor stack with a 10 metre CCS2 cable and draws from the same DC bus as your solar and battery. Available as 12.5 kW (upgradable) or 25 kW.

Charging Speed

Approximate time to fill a 60 kWh battery from empty. These are theoretical figures: real charging tapers near full, involves some losses, and is capped by what your car will accept.

ChargerPower to a typical carApprox. time
Standard 10 A wall socket~2.3 kW24+ hours
Sigen AC, 7 kW single-phase~7 kW~8–9 hours
Sigen AC, 11 kW three-phase~11 kW~5.5 hours
Sigen AC, 22 kW three-phaseUsually capped at 11 kW by the car~5.5 hours in most cars
SigenStor DC, 12.5 kW12.5 kW~5 hours
SigenStor DC, 25 kW25 kW~2.5 hours

The speed argument for DC is strongest at 25 kW, which more than doubles what most cars can pull from AC. For overnight charging every option finishes before morning, so the extra speed matters mainly for daytime top-ups or households with more than one EV.

Sigenergy EV Charger Price

Indicative Australian prices as at November 2026. Hardware is the unit alone. Installed is a typical Brisbane job including labour, a dedicated circuit and a normal cable run, and it is the figure worth comparing between quotes.

ItemHardware onlyTypical installed
Sigen EV AC, 7 kW~$1,200$1,980–$3,500, depending on phase, cable run and site conditions
Sigen EV AC, 11 kW~$1,300
Sigen EV AC, 22 kW~$1,500
SigenStor EV DC, 12.5 kW~$3,600–$4,000Quoted with the SigenStor system
SigenStor EV DC, 25 kW~$4,100–$4,700
  • Older reviews quote higher DC prices. Some 2025 reviews put the 25 kW module near $8,600. Distributors reported cutting Sigenergy EV DC pricing by roughly 40% in October 2025, so older figures overstate today’s cost.
  • The DC module cannot be bought on its own. It needs a SigenStor system. If you already have one, it is a retrofit. If you do not, compare the cost of the whole system, not the module alone.
  • Switchboard work is the wildcard. An upgrade can add significantly to either option. Our EV charger installation cost guide has the full breakdown.

Pros and Cons

Sigen EV AC Charger

Pros

  • Lowest cost in hardware and installation
  • Simple to install, including on single-phase homes
  • Surplus solar diversion in the mySigen app
  • OCPP support for third-party apps
  • Mounts wherever the car parks

Cons

  • Speed is capped by your car’s onboard charger
  • Some advanced features need a SigenStor system
  • Not bidirectional
  • Reviewers report minor teething issues, such as single/three-phase switching and cover fit

SigenStor EV DC Module

Pros

  • Genuine DC charging, up to 25 kW, at home
  • Bypasses the car’s onboard charger
  • Fewer conversion steps from solar and battery
  • Bidirectional-ready for vehicle-to-home
  • 12.5 kW version can be upgraded to 25 kW

Cons

  • Hardware costs two to three times as much as AC
  • Only available as part of a SigenStor system
  • The stack must sit near where the car parks
  • Top speed mainly suits three-phase systems and cars that accept high DC rates
  • Few cars in Australia currently support vehicle-to-home

Vehicle-to-Home Charging

Bidirectional charging lets your car’s battery power your home, for example to cover the evening peak or ride through an outage. The SigenStor DC module is built for it, which is a major reason people choose it. The catch is the car: it must support bidirectional DC charging, and the list of cars that do in Australia is still short and changing. Confirm that your car, or the one you are about to buy, can actually use it before paying for the capability. Treat it as a bonus rather than the main reason to buy.

Which Charger Should You Choose?

Your situationBetter fitWhy
Charge overnight, typical daily drivingACA 7 kW charger fills a typical EV overnight at the lowest cost
Single-phase homeAC (7 kW)Simplest and cheapest; the 25 kW DC module is aimed at larger three-phase systems
Want to charge from your own solarEitherBoth can use surplus solar; AC is cheaper, DC is faster and more direct
Two EVs or high daily kilometresDC (25 kW)Faster turnaround, best on a three-phase system
Want vehicle-to-homeDCOnly the DC module is bidirectional-ready, if your car supports it
Already have a SigenStorEitherDC is a retrofit onto your stack; see our 12kW DC retrofit
Not buying a batteryACThe DC module needs a SigenStor system

For most households our starting point is the AC charger. It does the job overnight for far less, and the savings are usually better spent on a bigger battery or more solar. We recommend DC where there is a clear reason: fast turnaround, a three-phase supply, a SigenStor already on the wall, or a car that can send power back. We will look at your car, your switchboard and your driving pattern and tell you which makes sense.

Frequently Asked Questions

What is the difference between the Sigenergy AC and DC EV chargers?
The Sigen EV AC Charger passes AC power to your car, and the car’s onboard charger converts it to DC. The SigenStor EV DC Charging Module converts power inside the charger and feeds DC straight into the car’s battery, bypassing the onboard charger. That makes DC faster (up to 25 kW) and capable of bidirectional charging, but it costs more and only works as part of a SigenStor system.
How much does a Sigenergy EV charger cost in Australia?
The Sigen EV AC Charger is about $1,200 to $1,500 for the unit and typically $1,980 to $3,500 installed in Brisbane. The SigenStor EV DC module is about $3,600 to $4,000 for the 12.5 kW version and $4,100 to $4,700 for the 25 kW version in hardware, and is quoted as part of a SigenStor system. Prices are indicative and vary with site conditions.
Can I install the Sigenergy DC charger without a SigenStor battery system?
No. The EV DC Charging Module is a component of the SigenStor stack and relies on it for power and control. If you do not have a SigenStor, the DC charger would be part of a new system. The Sigen EV AC Charger is the option for homes that want a charger without a full system.
Is a 22 kW AC charger faster than a 7 kW one?
Only if your car can accept it. Most EVs sold in Australia accept 11 kW or less on AC, so a 22 kW charger usually delivers 11 kW. Check your car’s maximum AC rate before paying for a three-phase upgrade.
Will the DC charger work with my car?
It uses a CCS2 connector, the standard on most EVs sold in Australia, so most modern cars can charge from it. How fast depends on your car’s maximum DC rate, and bidirectional use depends on whether the car supports vehicle-to-home. Confirm both with your car’s manufacturer or with us before buying.
Is the Sigenergy DC charger worth the extra cost?
For most households, no: the AC charger fills a car overnight for far less. The DC module is worth it if you want fast top-ups, run more than one EV, have or are buying a SigenStor and a three-phase supply, or plan to use vehicle-to-home. It is a premium feature rather than a necessity.
Can I charge my EV from my own solar with the Sigenergy chargers?
Yes. With a Sigenergy system, both chargers can use surplus solar, managed through the mySigen app. The DC module draws from the same DC bus as your solar and battery, which reduces conversion steps. See our EV charger guide for how solar charging works and what it saves.
Do I need three-phase power for a Sigenergy EV charger?
No. The 7 kW AC charger runs on single-phase power, which most Brisbane homes have. The 11 kW and 22 kW AC chargers need three-phase, and the 25 kW DC module is generally aimed at three-phase systems. We will check your supply during the site assessment.

Next Steps

If you are in Brisbane, the Gold Coast, Sunshine Coast, Ipswich, Logan, Redlands or Moreton Bay and are weighing a Sigenergy AC or DC charger, Connect Energy is a SAA-accredited solar and battery installer based at 4/38 Limestone Street, Darra QLD 4076. We install both, including DC charger retrofits onto existing Sigenergy systems. We can assess your switchboard, supply and car, recommend the right charger and give you a fixed-price quote.

Not sure whether AC or DC suits your home?

Tell us about your car and your setup, and we will recommend the right charger.

Get a Free Quote

Connect Energy Solutions is an SAA accredited solar and battery installer based in Brisbane, QLD (Licence 89059). All figures are in AUD and current as of November 2026. Hardware prices are indicative figures from Australian distributors and retailers; installed prices are indicative ranges based on Brisbane installer quotes. Charging times are theoretical and depend on your car’s maximum charge rate. Individual costs vary based on site conditions, charger choice, switchboard age, cable distance and installation complexity. Contact us or your preferred SAA-accredited installer for a quote specific to your home.

Connect Energy delivers comprehensive residential, commercial, and industrial solar solutions across Brisbane. From custom installation to ongoing maintenance, we empower communities with reliable, sustainable power.