Cost Guide

Solar Installation Cost in Brisbane: 2026 Price Guide

What residential solar actually costs in Greater Brisbane, what moves the figure on your quote, and which incentives reduce it.

Brett FisherUpdated 26 September 20266 min read

Brisbane Solar System Prices

Indicative installed pricing for CEC-approved residential systems in Brisbane and across South East Queensland, after the federal STC discount is applied. Final pricing is confirmed in writing following a site inspection, because roof type, storey height and switchboard condition all affect the installation.

6.6 kW System

2-3 bedroom homes

$3,990 – $5,490

After federal STC discount

  • 14-16 Tier-1 solar panels
  • 5kW smart inverter
  • Wi-Fi monitoring included

10 kW System

4+ bedrooms with air conditioning

$7,490 – $9,490

After federal STC discount

  • 24-26 Tier-1 solar panels
  • 8.5kW-10kW smart inverter
  • Three-phase compatible

13.2 kW System

High usage and EV charging

$9,990 – $12,490

After federal STC discount

  • 30-34 premium solar panels
  • 10kW dual-MPPT inverter
  • Suits daytime-heavy households

Solar + Battery

Adding storage to any system

$7,600 – $16,000

Battery only, after the federal battery discount

Queensland solar rebates and installed solar panel prices - Connect Energy Brisbane

Solar panel prices in Brisbane at a glance

The same four systems, set out so you can compare them on the measure that actually lets you judge a quote: price per kilowatt of capacity.

System sizePanelsInverterInstalled pricePer kWSuits
6.6 kW14–165 kW$3,990 – $5,490$605 – $8322–3 bedroom homes
10 kW24–268.5–10 kW$7,490 – $9,490$749 – $9494+ bedrooms with air conditioning
13.2 kW30–3410 kW dual-MPPT$9,990 – $12,490$757 – $946High usage and EV charging
Battery (added)—Hybrid$7,600 – $16,0008–24 kWh usableEvening usage and blackout backup

All prices are after the federal STC discount has been applied, which is how they will appear on a Connect Energy quote. Note that the 6.6 kW system is the sharpest price per kilowatt on the list — the entry system is priced keenly, and per-kilowatt cost does not keep falling as systems get larger, because bigger systems need heavier inverters, more mounting hardware and more electrical work.

If you are comparing quotes, per-kilowatt is the number to convert everything to. A $9,000 quote for 10 kW and a $12,000 quote for 13.2 kW look very different until you work out that they are $900 and $909 per kilowatt — effectively the same price.

One naming note, because it causes confusion: systems described as 13.2 kW and 13.3 kW are the same tier. The small difference comes from panel wattage, not system class — thirty-three 400 W panels make 13.2 kW, while thirty-five 380 W panels make 13.3 kW. Price them the same and compare the component list instead.

What solar panels cost on their own

People often search for the cost of solar panels and get quoted the cost of a solar system. They are not the same number, and the gap is where most of the confusion about pricing lives.

The panels themselves are typically around a third of an installed residential system price. The rest is everything that turns a pallet of panels into a working, compliant, warrantied installation:

  • The inverter — the single most expensive component after the panels, and the one most likely to need replacing first.
  • Mounting and racking — rails, feet, roof penetrations and flashing, specified to your roof type and wind zone.
  • Electrical work — DC and AC cabling, isolators, switchboard work and any upgrade your board needs before it can take a system.
  • Labour — a licensed electrician and an accredited installer on the roof, plus height safety.
  • Design, approvals and compliance — system design, the Energex connection application, metering coordination and the compliance paperwork issued on completion.

This is why buying panels online and finding someone to fit them rarely saves what people expect. The panels are the cheap part, and a system installed outside the accredited process does not qualify for the federal rebate at all — which usually costs more than the labour saved.

It is also why per-panel pricing is a poor way to compare quotes. Two installers quoting the same panel at the same count can be hundreds of dollars apart on the rest of the job, and that difference is usually in the inverter tier, the switchboard allowance, or whether the quote assumes your roof is straightforward.

What changes the price between Brisbane and the rest of Queensland

The prices on this page are Greater Brisbane prices, and they hold across most of South East Queensland — Logan, Ipswich, the Redlands, Moreton Bay, and down to the Gold Coast.

Further north, two things move the figure. Cyclone-rated mounting is required in higher wind regions, which adds hardware and labour. And travel time is priced into any job outside an installer’s normal service area, which is worth asking about directly rather than discovering at invoice stage.

Within South East Queensland, the variables that actually move your quote are on your own property rather than your postcode: roof type and storey height, roof complexity, switchboard condition, and whether your supply is single-phase or three-phase.

What Changes the Cost of Your Installation

Two homes with identical system sizes can receive different quotes. The variables that move the figure most are physical rather than commercial, which is why we inspect before pricing.

  • Roof type and height – a single-storey tin roof is quicker and cheaper to work on than two-storey tile
  • Roof complexity – multiple orientations or limited clear runs increase mounting time and hardware
  • Switchboard condition – older boards may need upgrading before a system can be connected
  • Single-phase or three-phase supply, which determines inverter selection
  • Panel and inverter tier, with heat tolerance mattering more in Queensland than cooler states

What a Proper Solar Quote Should Show

Comparing quotes is difficult when they are presented differently. A quote you can actually assess should state each of the following, and any installer should be willing to provide them before you commit. For what a quote from us states and what we are accredited to install, see our Brisbane installers page.

  1. Exact Components

    Panel and inverter make, model and quantity – not just a system size in kilowatts.

  2. Generation Estimate

    An annual output figure modelled on your specific roof and orientation, not a generic average.

  3. Rebate Shown Separately

    The STC discount as its own line, so you can see both the gross and net figures.

  4. Warranty Split Out

    Product, performance and workmanship terms stated separately, with the installer named.

Brisbane Solar Cost FAQs

How much does a 6.6kW solar system cost in Brisbane?
A quality Tier-1 6.6kW system in Brisbane typically falls between $3,990 and $5,490 out of pocket once the federal STC discount is applied. The range reflects roof type, storey height and component tier. Final pricing is confirmed in writing after a site inspection.
What affects the price most?
Roof access and complexity, followed by component tier. A single-storey tin roof with one clear orientation is the least expensive to work on. Two-storey tile roofs, multiple orientations and switchboard upgrades all add cost. Three-phase properties need a different inverter to single-phase homes.
Are solar rebates still available in Queensland?
Yes. Queensland households can access the federal Small-scale Technology Certificate scheme, applied as an upfront point-of-sale discount on your quote. Battery incentives are delivered through the federal Cheaper Home Batteries Program, broken down in our Brisbane battery storage guide. The Queensland Battery Booster scheme closed in May 2024 and is no longer available.
Is the quoted price fixed?
Connect Energy quotes are fixed and itemised after a physical site inspection, with the STC discount already applied. We do not provide estimates over the phone, because roof condition and switchboard capacity cannot be assessed remotely and are the two most common causes of price variation elsewhere.
Should I add a battery at the same time as solar?
It depends on when you use power. Households out during the day export most of their generation and benefit sooner from storage. Households with high daytime use may be better installing solar first on a hybrid inverter, leaving the system battery-ready so storage can be added later without replacing hardware.
Is cheaper solar worth it?
The risk with entry-level systems is usually heat tolerance and warranty support rather than day-one output. Queensland roof temperatures are harder on panels and inverters than most Australian conditions, and a warranty is only useful if the manufacturer still has an Australian presence when you need it. Day-one output differs less than the price gap suggests: we mounted sixteen panels on one test array at our head office and the spread between best and worst was 14%.

Get your custom Brisbane solar quote

Run your numbers in 60 seconds, then we confirm the figure in writing after a site inspection.

Try the Solar Savings Calculator

Connect Energy delivers comprehensive residential, commercial, and industrial solar solutions across Brisbane. From custom installation to ongoing maintenance, we empower communities with reliable, sustainable power.